MS-205 is an Urethane acrylate-based Sand Finish matt UV curable varnish for PVC board and tile for general application. It has medium viscosity, good hardness and scratch resistance especially for high performance PVC flooring coating. It shows outstanding matt quality.
Specification
| Appearance / Color |
Opaque Viscous Liquid |
| Viscosity (Brook-field#5 60rpm, 25°C) |
3200 ± 500 cps |
| Curing Speed |
10 M / min (120W/cm, 4 lamps)
Halogen Lamp (UV lamp energy 400mJ/cm2) |
| Gloss Reading at 60° |
4 - 8 |
Operation Condition
- Storage: keep away from high temperature, high humidity and direct sun-light; keep tightly closed while storing.
- Product expiration: sealed, 12 months.
- This product is non self-ignition, corrosive and explosive. For risk, wear mask and gloves while using and handling, and keep watch to prevent touching and breathing. If skin is contacted, Prompt and thoroughly flush skin with plenty of water use soap if available. If irritation persists, seek medical attention. If eye is contacted, rinse eyes immediately with large amounts of water (or 0.9% sterile salt solution) for at least 15 minutes and contact physician as needed. (S26)
- Fire Point: 102°C (method: ASTM D92). Fire Fighting Material: foam or CO2 extinguisher.
Package
20Kgs black plastic drum |
