Material Safety Data Sheet
Product Name: W-185 Water-Based U.V Primer
1. Identification Of The Substance And Company Information
- Trade Name: Water-Based U.V Primer
- Product Code: W-185
- Product Class: Acrylic Emulsion
- Generic Name: Water-Base Paper Coating Varnish
2. Hazards Identification
- Inhalation
- May cause irritation of the respiratory tract, experienced as burning sensation of eyes, nose, and throat, sneezing and nausea.
- Eye Contact
- Liquid may cause discomfort in the eye with slight excess redness and possibly swelling of the conjunctiva.
- Skin contact
- Brief contact is not irritating. Prolonged contact, as from clothing wet with the material, may cause mild irritation, experienced as discomfort, and seen as local redness.
- Skin Absorption
- No evidence of harmful effects form available information.
- Swallowing
- No evidence of harmful effects form available information.
3. Composition
| (% Chemical Component by WT.) |
| |
CAS# |
WT.% |
| Acrylate Monomer |
42978-66-5 |
40 |
| Water |
7732-18-5 |
56 |
| Ammonia |
7664-41-7 |
4 |
4. First Aid Measures
- Inhalation:
- Remove to fresh air. Consult physician/medical help if respiratory is not relieved by fresh air. Give artificial respiration or oxygen if necessary.
- Eye Contact:
- Rinse eyes immediately with large amounts of water for at least 15 minutes and contact physician as needed. (S26)
- Skin Contact:
- Remove contaminated clothing. Wash skin with soap and water. If irritation persists or if contact has been prolonged, obtain medical attention.
- Ingestion:
- Wash out mouth with water, do not induce vomiting. Consult physician.
5. Fire Fighting Measures
- Fire point and Auto-Ignition Temperature:
- Auto-ignition temperature: Not currently available.
- Extinguishing Media:
- Non-Flammable (aqueous solution): After water evaporates, remaining material will burn. Apply alcohol-type or all-purpose-type foam by manufacturers' recommended techniques for large fires. Use water spray, carbon dioxide or dry chemical media for small fires.
- Extinguishing Media to Avoid:
- No information currently available.
- Special Fire Fighting Procedure:
- No information currently available.
- Special Protective Equipment for Firefighters:
- Use self-contained breathing apparatus when fighting fires in enclosed areas.
- Hazardous polymerization may occur under fire condition, and toxic fumes may be released.
- Unusual Fire and Explosion Hazards
- Product will not burn but may spatter if temperature exceeds boiling point of water.
6. Accidental Release Measures
- Steps to be taken if Material is Released or Spilled:
- Small spills can be flushed with large amounts of water: larger spills should be collected for disposal.
- Personal Precautions:
- Wear suitable protective equipment. See Section 8.2-Personal Protection.
- Environmental Precautions:
- Not toxic to fish or plans.
7. Handling And Storage
- Handling:
- General Handling
- Avoid breathing vapor from container opening.
- Avoid contact with skin and clothing.
- Keep container closed.
- Use with adequate ventilation.
- Wash thoroughly after handling.
- Ventilation
- General (mechanical) room ventilation is expected to be satisfactory for use at room temperature.
- Storage:
- Store in a cool dry place.
8. Exposure Controls / Personal Protection
- Respiratory Protection:
- None required if airborne concentrations are maintained below listed exposure limits. If airborne concentrations exceed listed exposure limits, elect respiratory protection equipment in accordance with OSHA Standard 29 CFR 1910.134. If necessary, use NIOSH approved mist respirator in poorly ventilated areas.
- Ventilation:
- General (mechanical) room ventilation is expected to be satisfactory for use at room temperature.
- Eye Protection:
- Hand Protection:
- Safety glasses or monogoggles, as appropriate.
- Protective Gloves:
- Polyvinyl chloride coated.
9. Physical And Chemical Properties
| Physical State: Liquid |
Form: White Emulsion |
| Color: Milky White |
Odor: Mild Odor |
| PH: 7 ~ 9 |
Boiling Point/Boiling Range: Approx. 100°C |
| Decomposition Temp.: > 150°C |
Flash Point¡®Method Used: NA |
| Autoignition Temp.: NA |
Explosion Properties: NA |
| Vapor Pressure: NA |
Vapor Density: 1 (Air=1) |
| Density: 1.0-1.1/20°C |
Solubility: Miscible In All Proportions |
10. Stability And Reactivity
- Stability:
- Stable under normal conditions.
- Conditions To Avoid:
- Direct sunlight, heat, flames. Contact with acids.
11. Toxicological Information
- Information on analogous products shows minimal toxicity concerns.
- Acute Toxicity
- Peroral: Rat LD50 > 2000 mg/kg
12. Disposal Considerations
- Environmental Fate:
- Not toxic to fish or plants, Does not inhibit bacteria in waste treatment facilities, Polymer is not biodegradable, Product is not RCRA hazardous, The following information is based on analogy with a similar material.
- BOD (% Oxygen Consumption)
- Day 5, Day 10, Day 15, Day20, Day 30
- 1 - 8%
- Ecotoxicity:
- Toxicity to Micro-organisms: IC50 > 2000 mg/l
- Toxicity to Aquatic Invertebrates: Daphnia EC50 > 1000 mg/l
- Toxicity to Fish: Fathead Minnow LC50 > 1000 mg/l
- Further Information
13. Ecological Information
- Waste Disposal Method
- Incinerate in a furnace or otherwise dispose of in accordance with applicable, State and local requirements. Dispose in accordance with all applicable Federal, State, and local environmental regulations. Empty containers should be recycled or disposed of through an approved waste management facility
- Disposal Considerations
- Does not inhibit bacteria in waste treatment facilities. Polymer is not biodegradable.
- Product is not RCRA hazardous.
- Disposal methods identified are for the product as sold. For proper disposal of used material, an assessment must be completed to determine the proper and permissible waste management options permissible under applicable rules, regulations and/or laws governing your location.
14. Transport Information
- U.S.D.O.T
- Non-Bulk
- Marine Pollutant: Not listed
- Proper Shipping Name: Not Reguulated
- This information is not intended to convey all specific regulatory or operational requirements/information relating to this product. Additional transportation system information can be obtained through an authorized sales or customer service representative. It is the responsibility of the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the material.
15. Regulatory Information
- It is the responsibility of the user to know and comply with all applicable rules, regulations and laws relating to the product being used.
16. Other Information
- Prepared By:
- Notice:
- Recipients of this Material Safety Data Sheet must make their own assessment of workplace risk as required by other health and safety legislation.
- Liability:
- The information in this MSDS is correct to the best of our knowledge at the date of publication. It is given in good faith but no warranty is implied with respect to the quality and specification of the product.
|